CHOOSE PROPER INDUSTRIAL FACTORY CONSTRUCTION MATERIALS

1. How to choose materials in industrial factory construction according to each factor

1.1. Intended use

• Type of production: What products is the factory used to produce? Does the production process have any special material requirements?

For example, chemical factories need materials with high corrosion resistance, textile factories need materials with good dust resistance, etc.

• Load: What is the load exerted by machinery, equipment, raw materials and finished products on the factory structure? It is necessary to choose materials with appropriate load-bearing capacity to ensure the safety of industrial factory construction.
• Environmental requirements: What is the humidity, temperature, and dust level of the environment inside the factory? It is necessary to choose materials that can withstand these environmental factors to ensure the durability and longevity of the project.

1.2. Climatic conditions

Climate is another important factor that must be considered when choosing materials. Parameters such as average temperature range throughout the year, rain, snow, weather, amount of sunlight, required ventilation and wind are areas of concern.

It is necessary to consider the impact of weather when building a factory, such as: Can the factory be affected by severe weather phenomena such as storms and floods? Choosing materials that can withstand these weather phenomena will ensure the safety of the project.

1.3. Structural requirements

• Aperture: What is the factory span aperture? It is necessary to choose materials with the ability to span appropriately to ensure aesthetics and efficiency for the project.
• Height: What is the height of the factory? It is necessary to choose materials with high bearing capacity to ensure the safety of the project.
• Roof shape: What is the shape of the factory roof? It is necessary to choose materials suitable for the roof shape to ensure good drainage and waterproofing.

(Illustration, source: Internet Collection)

1.4. Durability

Material durability is important for building a structure that will last a long time without requiring significant maintenance costs. So certain materials may be more expensive than others, but low future maintenance costs will compensate for that high cost.

1.5. Factory construction costs

In most cases, the cost of construction materials will drive the final decision on material selection.

The cost of construction materials makes up a large part of the total cost, which is why it plays an important role.

1.6. Recyclability

The recyclability of materials at the end of their life plays an important role when they are selected. For example, building designers and contractors should use bolted steel connections instead of welded steel connections when building industrial factories. Although they will require more effort and precision to make, they are completely recyclable.

1.7. Specifications

Material specifications and qualities are established for a given project based on required strength, aesthetic appearance, durability, etc.

For example, specifications may require cement to resist chloride and carbonate attack if a structure is to be constructed in a tidal zone. In this case, additional additives and adhesive materials may be necessary.

(Illustration, source: Internet Collection)

2. Suggestions for choosing each material item when building an industrial factory

2.1. Factory frame

Steel: Popular choice due to its high durability, good load-bearing capacity, ease of construction, and reasonable price. Hot-dip galvanized steel should be given priority to increase corrosion resistance.
Reinforced concrete: Suitable for factories with large loads and requiring high solidity. However, construction costs will be higher than steel.
Wood: Environmentally friendly, highly aesthetic choice, but keep in mind load-bearing capacity and durability. Suitable for small-scale factories or with special aesthetic requirements.

2.2. Roofing materials

• Galvanized steel: The most popular choice due to its low price, light weight, ease of construction, and high durability. However, galvanized steel can cause heat in the summer.
• Insulated corrugated iron: Helps prevent heat, saves energy, but costs more. Suitable for factories in hot climate areas.
• Polycarbonate roofing sheets: Allows natural light, saves energy, but is less durable than galvanized steel and has a high price. Suitable for factories that need light or have special aesthetic requirements.

2.3. Wall construction materials

• Block bricks: Cost-effective, quick to construct, but have limited soundproofing and heat-insulating capabilities. Suitable for factories that do not require high soundproofing or heat insulation.
• Panel: Good soundproofing, thermal insulation, quick construction but higher cost. Suitable for factories that need good sound insulation, good heat insulation or have special aesthetic requirements.
• Lightweight concrete bricks: Lightweight, durable, good soundproofing and thermal insulation, but high cost. Suitable for factories that need many advantages such as durability, sound insulation, heat insulation and aesthetics.

2.4. Factory floor materials

• Reinforced concrete: The most popular choice due to its high durability, high load capacity, and ease of construction.
• Epoxy paint: Resistant to abrasion, chemicals, easy to clean but high cost. Suitable for factories with high requirements for durability, resistance and hygiene.
• Ceramic tiles: Waterproof, easy to clean, highly aesthetic but low load bearing. Suitable for office areas, restrooms or with high aesthetic requirements.

2.5. Fireproof materials

There are many different types of fireproof materials such as: fireproof paint, fireproof plasterboard, fireproof steel purlins, etc. Help protect factory structures and internal assets from the risk of fire.

Note that it is necessary to choose fireproof materials in accordance with the fire prevention and fighting standards requirements of each area.

2.6. Soundproofing materials

There are many different types of soundproofing materials such as: mineral wool, glass wool, EPS foam, etc. Helps reduce noise from outside or from production activities inside the factory. Besides, it is necessary to pay attention to choosing soundproofing materials suitable to usage needs and environmental conditions.

2.7. Waterproof material

Waterproof materials in factory construction help prevent rainwater and groundwater from seeping into the factory, protecting the structure and assets inside. There are many different types of waterproofing materials such as waterproof membranes, waterproof paints, etc.

(Illustration, source: Internet Collection)

Choosing suitable construction materials for an industrial factory is an important decision, affecting the operating efficiency and profits of the business. Prefabricated steel brings many practical professional and economic benefits, helping investors optimize investment efficiency, save costs and contribute to environmental protection.

4. Introducing a reputable design & construction consulting service provider

The importance of construction units is undeniable because their reputation will ensure the quality and aesthetics of your project. Today, there are many units providing construction design services to meet the increasing construction demand in our country. Therefore, finding a reputable unit is not easy and requires you to spend time researching. During the selection process, you need to research carefully and ensure that the accompanying unit must have high professional qualifications, many years of experience, have a clearly signed contract, transparent costs,... Nowadays, according to feedback from some customers who have contacted Hung Nghiep Phu shows that there are currently many fraudulent units that are construction design consulting companies to scam people for many different purposes. To help customers save time searching, Công ty TNHH Đầu Tư Xây Dựng Hưng Nghiệp Phú is confident that it will be the best choice for you.

Hung Nghiep Phu Construction Investment Co., Ltd. with the mission of bringing the best solutions and services, together with customers to build a prosperous community, Hung Nghiep Phu is gradually asserting its brand through Sincere cooperation, with a team of leaders with ethical capacity, creativity, dedication to the profession, and strategic vision. Hung Nghiep Phu owns a team of skilled and highly qualified staff who will bring customers the best quality projects. 

Hung Nghiep Phu Construction Investment Company Limited - specializes in constructing civil and industrial projects. We look forward to accompanying customers in construction projects as well as legal procedures such as planning diagrams, applying for construction permits, completing processes, applying for fire prevention and fighting certificates, ... If you have any questions or are in need of designing and perfecting the process, please contact us immediately for a free consultation!

>>> See more:

• Cách chia bậc thang theo phong thủy và hướng dẫn xây dựng bậc cầu thang

• So sánh móng một phương và móng hai phương

• Top những mẫu nhà đẹp nhất hiện nay

• Có nên khởi công xây dựng nhà vào lịch tháng 7 không?

• Có nên xây nhà trọn gói không?

• Tại sao cần có đội ngũ tư vấn thiết kế và thi công xây dựng 

_____________________

CONTACT INFO:

 Facebook:  Công ty TNHH Đầu Tư Xây Dựng Hưng Nghiệp Phú (興業富) 

 Đường dây nóng: 1800.3368 (Miễn phí)

 Trang web:  xaydunghunnghiepphu.com

 Gmail: kinhdoanh01@xaydunghungnghiepphu.com

 Address: No. 2034D, group 22, KP. Phuoc Thai, Thai Hoa Ward, City. Tan Uyen, Binh Duong Province

------

Source: Collected Internet