INSTRUCTIONS ON PROPER TECHNICAL CONSTRUCTION OF UNDERGROUND WATER TANK
In urban houses with limited space, you cannot build an above-ground water tank like in the countryside. Therefore, underground water tanks are often built to save space. However, to ensure the quality of the project, specific processes and procedures are required. Below we will guide you on how to construct an underground water tank, follow along with Hung Nghiep Phu!
1. Simple instructions for underground water tank construction
Before proceeding with construction, it is necessary to learn about the underground water tank construction method, calculate and measure carefully. In order not to affect the water source of the tank. The construction of underground water tanks requires techniques and methods. Below are the simple steps to implement the underground water tank construction method:
Step 1: Survey the construction site area
The first step in the underground water tank construction method is to determine the location of the tank, calculate the dimensions, measure parameters such as length, width, height. Draw and prepare detailed drawings. The construction team then begins to dig the soil to form the body of the water tank. Then build according to the drawing with bricks or concrete.
Step 2: Install the water supply and drainage system in the underground water tank
The next step in the underground water tank construction method is that you should pay more attention to the vent holes, water pump holes and overflow holes. Because it is the system that helps the underground water tank operate well and without problems.
(Bản vẽ của biện pháp thi công bể nước ngầm)
Step 3: Build the ground and bury the underground water tank
It can be said that this is a necessary step in the process of building an underground water tank. Because the tank directly affects the quality of the entire project. Therefore, you must be careful and meticulous when implementing, because if the construction is wrong, it will be very difficult to fix later.
After carefully studying the structure and design. We continue to lower the ground to the determined location so that it is balanced with the concrete wall. Pump water into the underground tank, then pump and pour cement and sand into the tank wall until the tank wall is full. Soak the entire tank in water for 1 week, let the cement dry and completely fix the tank frame.
Step 4: Regularly clean the underground water tank
The underground water tank has a lid and is quite tight, however, small dirt can follow the lid or crack and flow directly into the water. Therefore, the water can be polluted or contaminated. Therefore, the water tank must be cleaned and replaced regularly every six months. This will provide clean water that is not contaminated by algae and impurities.
2. Advantages and disadvantages of underground water tanks
Advantages of underground water tank construction method: can be used for many years. The water tank is sturdy and difficult to break due to external impacts. The water tank can store a large amount of water, save space, suitable for small houses.
Disadvantages of underground water tank construction method: cleaning an underground water tank is quite difficult. Water tank contamination is very likely to occur due to the system's lid not being secure, not being tight enough, not being tight enough. This causes dangerous water pollution.
3. Notes on materials used
To maximize the effectiveness of underground water tank construction, it is also necessary to pay attention to the quality of the materials. Specifically, you need to pay attention to the following when selecting materials for underground water tank construction:
- Wash the bricks and soak them in water to avoid water seepage from the cement mortar.
- The yellow sand must be pure and clean.
- The construction must pay attention to locking the head and tail, the support of the reinforced foundation must be sturdy.
- The foundation must be carefully compacted and lined.
- The cement in the tank wall must be of high quality to avoid the formation of bubbles in the cement layer causing water seepage.
4. Notes on underground water tank construction methods
In addition to the quality of input materials, you also need to pay attention to some other issues in the underground water tank construction method. To ensure the effectiveness of the underground water tank construction method:
- Respecting the design and construction regulations is essential. Regarding the ability to waterproof (inside and outside), in addition to using 2 layers of geotextile. Currently, the popular underground water tank construction method is to build a brick nest, then lower the stainless steel tank and pour sand in for efficiency.
- When dealing with the stop joint, tanks using concrete walls and having a floor area of <100m2 often do not have a stop joint. But the gap between the bottom and the wall is often poured concrete separately. Therefore, it is necessary to handle the stop chain with specialized waterproof tape. The structural steel layer must not tear the water barrier, the wall must not bend when pouring concrete.
- The drainage pipes must be installed at the same time as pouring concrete, and a waterproof sealant must be placed around the pipes. If the water level is high, measures must be taken to increase the load on the tank to prevent compression when there is no water in the tank. Reasonable measures must be taken during excavation and backfilling to avoid overturning.
Above is an article referring to the technical method of underground water tank construction. Hopefully, this article will help you understand the construction of underground water tanks and choose the safest construction team!
5. Introducing a reputable design & construction consulting service provider
The importance of construction units is undeniable, their reputation will ensure the quality and aesthetics of your project. Currently, there are many units providing design and construction services to meet the increasing construction needs in our country. Therefore, finding a reputable unit is not easy and requires you to spend time researching. In the selection process, you need to research carefully and ensure that the accompanying unit must have high expertise, many years of experience, have a clearly signed contract, transparent costs,... To help customers save time searching, Hung Nghiep Phu Construction Investment Co., Ltd. is confident that it will be the best choice for you.
Hung Nghiep Phu Construction Investment Co., Ltd. with the mission of providing the best solutions and services, building a prosperous community with customers, Hung Nghiep Phu is gradually affirming its brand through sincere cooperation, with a leadership team with ethical capacity, creativity, high expertise and strategic vision. Hung Nghiep Phu owns a team of skilled, highly qualified employees who will bring customers the best quality technology.
Hung Nghiep Phu Construction Investment Co., Ltd. - specializes in constructing civil and industrial works. We look forward to accompanying customers in construction projects as well as continuous procedures such as planning diagrams, applying for construction permits, completing procedures, applying for fire prevention and fighting certificates, ... If you have any questions or are in need of design, completing procedures, please contact us immediately for free consultation!
>>> See more:
_____________________
CONTACT INFO:
Facebook: Công ty TNHH Đầu tư Xây dựng Hưng Nghiệp Phú (興業富)
Hotline: 1800.3368 (Miễn phí)
Website: xaydunghunnghiepphu.com
Gmail: kinhdoanh01@xaydunghungnghiepphu.com
Address: No. 2034D, Group 22, Phuoc Thai Hamlet, Thai Hoa Ward, Tan Uyen City, Binh Duong Province
------
Source: Compiled from the Internet
